agh150 series 150 watts total power: 150 watts input voltage: 36 - 75 v # of outputs: single special feature s ? 2:1 wide input range ? optimised for high density, small space applications ? low ripple and noise ? fixed switching frequency ? high effciency ? high capacitive load capability ? basic insulation system ? pre-bias start-up capability ? openframe structure with baseplate option safety ? ul, cul: ul60950 ? tuv/ce: iec/en60950 electrical specifcations input input ra nge: 36 - 75 vdc effciency 2 : 92% @ 5vo output voltage tolerance: +/-1% line regulation: +/- 0.2% load regulation: +/- 0.5% noise/ripple: 3.3 vo: 100 mv 5.0 vo: 100 mv over voltage protection: over temperature protection: auto-restart switching frequency: 280 khz temperature coeffcient: 0.02/c isolation i/o isolation: 2000 vdc min. data sheet environmental specifcations operating ambient temperature range: -40c to +85 c storage temperature: -55 c to +125 c humidity: 5% to 95% (non-condensing) mtbf: 2 million hours rohs compliant power
agh150 series data sheet mechanical drawings ordering information model number input voltage output voltage power AGH150-48S05-6 36 - 75 vin 5v @ 30a 150w agh150-48s05b-6 36 - 75 vin 5v @ 30a 150w agh150-48s05p-6 36 - 75 vin 5v @ 30a 150w agh150-48s05pb-6 36 - 75 vin 5v @ 30a 150w - standard version is negative enable - -6 = 3.8mm pin length - -l = rohs6 compliance - -p = positive enable - b = baseplate
agh150 series data sheet worldwide offices americas 2900 s.diablo way tempe, az 85282 usa +1 888 412 7832 e urope (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom +44 (0) 1384 842 211 a sia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong +852 2176 3333 for more information: www.artesyn.com/power for support: productsupport.ep@artesyn.com www.artesyn.com while every precaution has been taken to ensure accuracy and completeness in this literature, artesyn embedded technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. artesyn embedded technologies, artesyn and the artesyn embedded technologies logo are trademarks and service marks of artesyn embedded technologies, inc. all other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. ? 2014 artesyn embedded technologies, inc. agh150 ds rev. 07.08.14 notes: 1. all specifcations are subject to change without notice. mechanical drawings are for reference only. 2. warranty: 2 years 3. label and logo appearance may vary from what is shown on mechanical drawings. pin assignments pin function 1 +v in 2 enable 3 case 4 -v in 5 -v out 6 -sense 7 trim 8 +sense 9 +v out
|
